The tipper tie clip is mainly used for the packaging process of high-temperature meat foods, which can effectively ensure the storage performance of the sealing process medium and play an important role in food packaging. All tipper tie clips can't be sloppy in design, because it is related to people's food safety.
The tipper tie clips provide a convenient, quick and economical method of assembly of the product, because the combined part of the buckle is molded at the same time when the finished product is produced. It is not necessary to match other locking components such as screws and mesons, as long as the two sides of the combination are required. The clips can be interlocked with each other. Although the design of the buckle can have a variety of geometric shapes, the operation principle is basically the same.
When two parts are buckled, the hook-shaped extension of one of the parts is pushed away by the edge portion of the connected part. Until the end of the hitting edge is completed; and then, by the elasticity of the plastic, the hook-shaped extension is immediately reset, and the groove behind it is immediately embedded by the striking portion of the connected part, and the inverted position is immediately formed. Please pay attention to the following points when designing:
1. Choose the right amount of deformation. The semi-automatic clipper are installed by deformation and bounce of the fasteners. Too small deformation is easy to cause the installation that not strong; too much deformation can easily lead to installation difficulties or even failure, destroying the tipper tie clips. It is important to choose the right amount of deformation.
2. When designing, pay attention to some obvious phenomena such as sound and feel changes when the tipper tie clips is installed.
3. When designing, pay attention to the number of constraints on the tipper tie clips, and you should not be over-constrained. Too many constraints, high requirements on the machining accuracy of the parts. In the actual assembly process, it is easy to cause the installation to be out of place or not to be installed.
In short, the tipper tie clips have strict requirements in design. Don't look down on the small clips. It requires professional skills! If you need to buy them for your sausage production, please contact SHENGMAO today.
