The clips is generally suitable for the packaging process of anchoring agents and ham sausages. The clips can be smoothly used on card machines of any manufacturer and plays a very important role in product packaging.
Maybe many people don’t know what the U-shaped clips is. In fact, everyone has seen it, but they don’t know its name. In fact, the U-Clips is widely used. It is mainly used for the packaging process of high temperature meat it can effectively. The sealing performance of the storage process media plays an important role in food packaging. The following Clip manufacturer will take you to take a look.
The U-shaped clips is generally used with the U-shaped double-card sealing machine, which can be used for the two ends of ham sausage, sealant, and explosive packaging.
The tightness of the U-shaped clips hoop is sufficient, which can require the storage performance of the sealing process medium. In addition, the U-shaped clips can also be matched with the Double-card Sealing Machine. All technical indicators exceed the level of the same imported products, which can meet the use of various punching machines, and the models and specifications are complete.
The sealing machine is widely used in the two ends of ham sausage, sealant, explosive sealing packaging, and other special equipment for the sealing process. Its function is to fasten the specified type of clips to the two ends of the sealing process. After the clips hoop is tight, it has sufficient tightness, so that the storage performance of the sealing process medium is required. The clips and card double card sealer are necessary equipment for food processing plants.
The clips is mainly used for the packaging process of high-temperature meat food, which can effectively the storage performance of the sealing process medium, and plays an important role in food packaging. All clipss should not be careless when designing, because it is related to people's food, you need to pay attention to the following points when designing:
1. Select the appropriate amount of deformation. The clips is installed through deformation and rebound of the fastener. Too small deformation will easily cause the installation to be insecure; too large deformation will easily cause installation difficulties or even failure to install, and damage the clips. It is very important to choose the right amount of deformation.
2. When designing, pay attention to some obvious phenomena such as changes in sound and feel when the clips is installed in place.
3. When designing, pay attention to the number of constraints of the clips. Too many constraints require higher machining accuracy of the part. In the actual assembly process, it is easy to cause the installation to be incomplete or impossible.
In short, the clips has strict requirements in terms of design. Don't look down on the small clips. And feel free to contact SHENGMAO if you need to buy the clips!
